Copy Output (Specifying Finishing Options) - Fuji Xerox DocuCentre-IV C2263 User Manual

Copy Output (Specifying Finishing Options)

This feature allows you to select finishing options.
Note
If the finisher is installed, each set of copies can be stapled, and then output.
When the Hole Punch Kit for Finisher-B1 is installed, copies can be punched.
1
Select [Copy Output].
2
Select any option.
Auto
Copies are collated when any of the following features is used: 2 Sided Book Copying,
Covers, [Blank Separators & Handouts] or [Transparency Set & Handouts] of Transparency
Options, Booklet Creation, Stapling, Build Job, Sample Set, and Combine Original Sets.
Collated
The machine outputs sheets sorted into sets that are arranged in page order.
Uncollated
The machine outputs the specified number of copies and sorts sheets by page.
Uncollated with Separators
The machine outputs copies with inserting blank sheets as a separator and sorts sheets by
page.
When [Tray 5] is selected, the [Tray 5] is displayed. For more information, refer to "[Tray 5] Screen" (P.94).
Separator Tray
When you select [Uncollated with Separators], select the paper tray to be used for the
separators.
Note
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• When you use the bypass tray, select [Tray 5] on the [Separator Tray] screen.
Output Format
3
143