Installing The Tray Attachment On The Finisher-B1 - Fuji Xerox DocuCentre-IV C2263 User Manual

Installing the Tray Attachment on the Finisher-B1

When delivering A4
attachment supplied with the finisher tray if the outputs are not properly stacked up. Doing
so may help the outputs to be stacked more neatly.
1
Remove the tray attachment from the rear of
the finisher tray.
2
Install the tray attachment onto the middle of
the finisher tray as shown in the diagram.

Installing the Tray Attachment on the Finisher-B1

or B5 paper to the finisher tray without stapling, install the tray
2
71