Fuji Xerox DocuCentre-IV C2263 User Manual page 27

Laser Safety
CAUTION: Any operations or adjustments not stated in the operation manual may
cause hazardous light exposure and eventually burn injuries or loss of eyesight.
This product has been tested and found to comply with the Class 1 Laser Equipment
requirements defined by the international standard IEC60825 and has no light
exposure hazard. The product has no hazardous light emission as it features light
protection components and covers to shut in all light beam during operation and
maintenance.
Keep electrical and mechanical safety interlocks active. Keep the safety interlocks
away from magnetic materials. Magnetic materials may accidentally activate the
product and cause injuries or electric shock.
A ground fault interrupter is embedded in this product. If current leakage occurs,
the ground fault interrupter automatically cuts off power circuit to prevent electric
shock and a fire accident. The ground fault interrupter is normally ON ("|"). Check
once a month if the ground fault interrupter works properly in accordance with the
following procedures:
1
Press the power switch to the [ ] position to
switch the power off.
2
Make sure that the touch screen is blank and the <Energy Saver> button does not light up.
3
Open the front cover.
4
Press the main power switch to the [
position to switch the main power off.
]
Safety Notes
1
27