Fuji Xerox DocuCentre-IV C2263 User Manual page 224

4 Fax
Sending to Folder (F Code Method)
1
Select [F Code].
2
Select [On].
3
Select the [F Code] box, and enter an F code using the keyboard or the numeric keypad.
Note
4
4
If necessary, select the [Password] box, and enter a password using the keyboard or the
numeric keypad.
Note
Off
The F code transmission is not used.
On
The F code transmission is used. Enter the F Code.
F Code
Select the [F Code] box, and enter the F code using the keyboard or the numeric keypad.
Note
Password
Select the [Password] box, and enter the password using the keyboard or the numeric
keypad. If a password is not set, leave this box blank.
Note
Keyboard
You can use the keyboard to enter the F code or the password.
For information on how to enter texts, refer to "Entering Text" (P.70).
5
Specify a destination, and then press the <Start> button.
224
• You can enter up to 20 digits for the F code.
• You can enter up to 20 digits for the password.
• You can enter up to 20 digits for the F Code.
• You can enter up to 20 digits for the password.