Step 2 Selecting Features - Fuji Xerox DocuCentre-IV C2263 User Manual

4 Fax
1
Open the document cover.
Important • Ensure that the touch screen is active, and
2
Load the document face down, and align it
against the top left corner of the document
glass.
Note
3
Close the document cover.
Note
4

Step 2 Selecting Features

The following two services are available to send faxes.
Simple Fax
Allows you to only select basic features to send faxes.
Fax/Internet Fax
Allows you to make detailed settings to send faxes.
The following procedure uses [Fax/Internet Fax] to describe how to select features.
You can select the Fax or Internet Fax service, or the Server Fax service on the [Services
Home] screen.
For information on the Simple Fax feature, refer to "Simple Fax" (P.181).
Important • The Fax and Internet Fax services are not available while the Server Fax service is enabled.
Note
1
Press the <Services Home> button.
160
then load a document. Otherwise, the
machine may not properly detect the
document size.
• When you load a A5, B5 or A4 document on
the document glass in portrait orientation,
the scanned image is transmitted with 180
degrees rotated.
• When a standard size document is loaded on the document glass, the size of the document is
displayed in the message field.
• The features displayed on the screen depend on your machine configuration.
• When the Authentication or Accounting feature is enabled, a user ID and passcode may be required.
Ask your system administrator for the user ID and passcode.
<Services Home> button