Valve And Valve Spring - Mazda 626 1989 Workshop Manual

1 B
ASSEMBLY (CYLINDER HEAD)
Valve spring
Cylinder head side
1B -60

Valve and Valve Spring

1. Install the lower spring seat.
2. install the valve.
3. Install the valve springs and the upper spring seat.
Note
Install the outer and inner valve spring with
® > ®
the closer pitch toward the cylinder head.
76G01B-084
4. Compress the valve spring with the SST; then in­
stall the valve keepers.
5. Tap the end of the valve stem lightly two or three
times with a plastic hammer to confirm that the
keepers are all fully seated.
Hydraulic Lash Adjuster (HLA)
1. Apply engine oil to the sliding surface.
2. Install the HLA in the position from which they were
removed.
3. Check for free movement.
76G01B-086