4B
INTAKE AIR SYSTEM
t
Air c le a n e r - ^ ^ ^ s f P
'
a
Installation Note
Water hose spring clamps
Face the clamp ends as shown in the figure.
Gasket
Use new gaskets at the intake manifold, dynamic
chamber, and throttle body.
76F04B-Q31
Ground harnesses
Make sure that the ground harnesses are tightened
securely at the following positions.
(
(2) Solenoid valve bracket
(3) Engine hanger
valve j; X\"
MJ'
bracket
76G04C-062
Solenoid valve connectors
Connect the solenoid valve connectors at the posi
tions shown in the figure.
76G04C-063
Inspection after installation
1. After completing installation, fill the engine with the
2. Warm up the engine and run it at idle.
3. Check for any vacuum, coolant, or fuel leaks.
76F048-032
) Air cleaner upper case
1
specified engine coolant.
\