Mazda 626 1989 Workshop Manual page 255

Number: 054/89
PARTS INFORMATION
PART NUMBER
NEW
FU31 19 9A0E
9938 11 000
9956 21 400
FU32 19 9A6
9956 21 600
9928 21 930H
NOTE: *
IT IS NOT NECESSARY TO REPLACE THE THERMO SWITCH BOX FOR THIS OPERATION
UNLESS THE ORIGINAL IS DAM AG ED.
2. Internal Failure (slip, flare, hunting, chatter, vibration, shift shock)
A . Check the condition o f the ATF. I f it is burnt or discolored, inspect fluid in oil pan. Look for material
in ATF.
B. Perform the following:
-performance and stall tests
-repair or replace with rebuild as needed
3. Valve Body Modifications (shudder, surging, slip, flare, chatter, shift shock)
For 1988 626/M X -6, the following four modifications (A , B, C, D) to the valve body and the inner parts
have been incorporated in order to correct the slippage and/or chatter when shifting from D 1 - D 2 and to
reduce the shift shock when shifting from D 1 - D 2 or D 2 - D 3 .
A . Insure that the proper modifications have been made as specified.
• Beginning N o. o f 'nansaxle Unit Applicable to each Modification
Location o f I.D . Tag
Figure looking from the front o f vehicle
H ow to identify the unit No:
(1) Find arrow 1 : FU31
(2) Find arrow 2 : 078507
(3) This unit N o. is F U 3 1-078507
Date Issued:
DESCRIPTION
OLD
FU31 19 9A 0D Oil Pipe
—
Connector Bolt
—
Packing (Washer)
—
Thermo Switch Box
—
Packing (Washer)
9928 21 900 H ose Clamp
(Attached on
4/5/89
Date Revised: 8/18/89
INTERCHANGEABILITY
NEW — OLD *
NEW —
I.D . Tag
Arrow 1
Arrow
—
—
—
—
OLD *
F 8
G031
FU31
FU31
GJ23
FU 50
FU50
FU31
FU31
(Sample)
Page 3 of 9