Mazda 626 1989 Workshop Manual page 319

Number: 010/91
5. If necessary, move the A/C pipe away from
the radiator. Figure 1.
6. If hood rattles, adjust the hood lock.
7. Install new No. 1 and No. 2 engine mounts.
See Section " 1" or "B" o f the Workshop
Manual.
8. Remove and discard the muffler hangers and
rubbers. Figure 2.
9. Install the hanger bolts into the body to
prevent water entry.
10. If the steering wheel and seat still vibrate too
much, ground the test connector. Adjust idle
speed to 9 5 0 -1 0 0 0 rpm in "P." Disconnect
the test connector.
PARTS INFORMATION
PART NUMBER
M 002 39 040B
GJ28 39 040E
GJ23 39 050C
F202 15 202B
Page 2 o f 3
Date Issued: 10/3/91
DESCRIPTION
No. 1 Engine Mount
No. 1 Engine Mount
No. 2 Engine Mount
Lower Radiator Mount
Date Revised:
APPLICABLE
MODEL
Non-Turbo
Turbo
All
All
C .
(