Mazda 626 1989 Workshop Manual page 204

Number: 064/89
LOCATION 1 (DOOR MIRRORS)
A. Manual & Powered Mirrors.
1. Using a flat screwdriver, carefully pry
the inner sail garnish out o f its posi­
tion. (Start prying at top com er o f sail
garnish, then work downward).
CAUTION: Take care not to break the
2. Remove mirror and install pad on lower
side o f base as shown in the illustration.
3. Install seal rubber.
P/N GJ25 69 1IX (RH)
P/N GJ25 69 17X (LH)
B. Power Mirror
1) Remove seal rubber.
2) While holding mirror assembly
between thighs, push the assembly
in the direction indicated by the
arrows shown in the illustration
and install new seal rubber.
Seal Rubber:
P/N GJ35 69 IIX (RH)
P/N GJ35 69 17X (LH)
3) Move assembly in the direction
opposite that described in step 2),
and confirm proper position o f seal
rubber.
Date Issued: 4/11/89
fastening tab at the bottom
o f the sail garnish.
Date Revised: