Mazda 626 1989 Workshop Manual page 256

Number: 054/89
PARTS INFORM ATION
PART NO .
FU 06 21 100V
FU 3H 21 100A
FU4G 21 100A
FUY1 21 227
NOTE:*
1988 T /C M odels - repair should include accL
4 . Electrical (all problems)
If vehicle is a 1988 or 1989, use EC-AT tester as per Workshop Manual.
If vehicle is a 1987 m odel, check the electrical system harness as follows:
A . Check if the EGI harness is properly grounded
at the B32 connector.
If the terminal is rusted or the bolt is loose, repair
it and apply a suitable anti-rust agent.
Then, go to step B.
B. Connect an EC-AT tester as per the 1987 626
Workshop Manual. (See page 7B-6)
C. Turn the ignition switch " O N " .
Date Issued:
DESCRIPTION
Valve Body (for '87)
Valve Body (for '88 T/C)
Valve Body (for '88 non-T/C)
Accumulator Spring (for '88 T /C )
4/5/89 Date Revised: 8/18/89
lator spring installation to e^ .iin ate shift shock.
Page 4 of 9