End Plate; Oil Pump - Mazda 626 1989 Workshop Manual

ASSEMBLY (CYLINDER BLOCK)
3. Install the rear cover and a new gasket.
Tightening torque:
8—12 N-m (80—120 cm-kg, 69—104 in-lb)
4. Cut away the portion of the gasket that projects out
from the rear cover assembly toward the oil pan
side.
Caution
Do not scratch the rear cover assembly.

End Plate

Install the end plate.
Tightening torque:
19—30 N-m (1.9—3.1 m-kg, 14—22 ft-lb)

Oil Pump

1. Apply engine oil to a new oil pump oil seal and the
oil pump body.
2. Press the oil seal into the oil pump body.
IB
1B—55