Mazda 626 1989 Workshop Manual page 211

Number: 064/89
5. Fold up the glass run channel (see illustra­
tion [Location 3 portion]) and install a pad
as indicated by the circle in the illustration.
Pad Size:
Length (4 & 5-Door) = 100 mm
Thickness
Width
6 . Using a flat screwdriver, remove the in­
ner sail garnish by prying it out at the area
shown by illustration and install a new
level inner sail garnish.
NOTE: Using a flat screwdriver, pry sail
garnish out o f its location, starting
from the lower rear com er then
working forward (as per illustra­
tion). A lso, care must be taken
not to damage paint on the sur­
rounding area.
7. Perform rear door weatherstrip improve­
ments following the same steps as used on
the front door (Section 2, steps 1 & 2).
Date Issued: 4/11/89
= 2 mm
= 10 mm
Date Revised:
P ad
GK59 72 618B
(to be trimmed to 100 mm)
W
OLD NEW
w ea strip
-
L ength
P i * ' 10 of 15