"A" Pillar Area - Mazda 626 1989 Workshop Manual

Number: 064/89
3. Remove the original glass guide rail pad
and replace it with a new one.
A) Install the glass rail pad so that the top
o f the pad is 30 mm from the bottom
o f the guide rail (see illustration).
(P/N GJ21 58 619)
B) . . remaining length o f the pad (10
mmj should be pinched so that the sides
stick together.
4. Reinstall glass guide rail and door panel.
CAUTION: For ease o f installation door
glass must be up approximate
ly 4 in.
LOCATION 5: "A" PILLAR AREA
1. 4 & 5-Door Models
A) Open front door and remove the fix­
ing screw from the lower side o f the
drip molding.
B) For 4 & 5-Door models, remove
original screw boss from pillar and
discard.
Date Issued: 4/11/89 Date Revised:
O rigin al Pads
Drip Moulding
Fixing Screw
Pag. ^ f 15