Mazda 626 1989 Workshop Manual page 234

Service Bulletin
Category
Applicable Model/s
All Models
4
(except B-Series)
DESCRIPTION
In an effort to reduce the cost o f repair, remanufactured EGI control units will be available effective
July 5, 1989. These control units replace new EGI control units when replacement is necessary for models
listed in the Parts Information section.
NOTE:
New EGI control units will NOT be available as the remanufactured unit will supersede the new. The units
must be returned in accordance with the procedures prescribed in Parts Bulletin II/48E or E-9-89. Failure
to do so will result in core forfeiture. These procedures include, but are not limited to, completion o f the
" Core Return Request" and " Core Credit Request" . This information is critical to the program's success.
Do not Include the bracket when returning the core. The bracket should be used when
Installing the remsnufsctured control unit. Please return cores WITHIN 7 DAYS to Insure
continued avsllablllty of remsnufsctured units.
PARTS INFORMATION
RX-7 Models
Remanufactured
EGI Control Unit
N304 18 8 8 1R
N 3Y6 18 881R
N332 18 8 8 IR
N327 18 8 8 1R
N333 18 881R
N338 18 8 8 1R
N 350 18 881R
N351 18 881R
N352 18 881R
N353 18 8 8 1R
N 370 18 881R
IM PO R TA N T
Signature__________________
015692
Subject
REM ANUFACTURED EGI CONTROL UNIT
84-85 GSL-SE
86-87 w /o Turbo
87 Turbo
88 Non-Turbo Coupe
88 Turbo
88 Convertible
89 Non-Turbo Coupe CA
89 Non-Turbo Coupe FED
89 Convertible CA
89 Convertible FED
89 Turbo
Service and Parts Managers should read this bulletin carefully, sign and convey all Information to Ihose concerned.
Service Manager
Irvine, California 92718
Telephone (714) 727-1990
PROGRAM
Application
Signature
Parts Manager
l n c m a z o B
Bulletin No. 059/89
Issued 7/19/89
Revised
Replaces New
EGI Control Unit
N304 18 880A
N 326 18 880,
N 3Y 6 18 880
N332 18 880
N 327 18 880
N333 18 880
N 338 18 880
N 350 18 880
N351 18 880
N352 18 880
N353 18 880
N 370 18 880
Page 1 of 4