Table of Contents
Advertisement
CHANGING DEFAULT SETTINGS
User Tools
User Tools for User Code Mode
If the copier
is set to use the User Code function,
operators
must
input
their
user
codes
before
the machine
can operate.
The copier
keeps
count
of the number
of
copies
made under
each user code.
To have the machine
set to the User Code
mode,
please
contact
your sales or service
representative
.
User tools
8,9,
10 and 11 are for the User Code mode.
When you want to use
these
user tools,
you should
enter the key operator
access
code first.
Please
ask
your sales or service
representative
for the key operator
access
code when
the
machine
is set to the User Code mode.
If your machine
is set to the User Code mode, to prevent
others from making
copies
using your user code, while holding down the Clear Modes
key, press the Clear/Stop
kev afier
coDvina.
~[
Set User Code(s)
Use to re ister your user code (maximum:
6 digits)
Register
~
Cl Up to
00 user codes can be registered.
~
Registered
user codes will be sorted in numerical
order.
Use
to change
your present
code to a new one.
Change
D The number of copies made under the old code is added
to that made under the new user code.
Delete
Use to delete your user code.
~ The number of copies made under the code is deleted.
c1
g
Check/Reset
copy count
You can check the number
of copies made using each user code.
Also, you can clear each
code's counter.
~[Reset
data for User Codes
Use to reset counter
data for all user codes.
n
11
Reset User Codes/Counters
Use to reset all user codes and counters,
18
Advertisement
Table of Contents
