Function; Model; Model Select; Model Name - Ko Propo EX-RR Instruction Manual

FUNCTION

Model menu
Save various settings as model memories Up to 40
model memories can be named and stored.
MODEL モデル
MODEL SEL セレクト
MODEL NAME ネーム
COPY コピー MDL01 TO
RESET リセット
▶ MODEL SEL
Switch between different model memories.

▶ MODEL NAME

Names the model memories.
▶ MODEL COPY
Copies model memories.
▶ MODEL RESET
Resets model memories.
▶ ALL RESET
Resets all model memories.

▶ MODEL SELECT

Switch between different model memories.
【Example】
If you have multiple cars, it is convenient to have a
separate model memory for each one. Even in the
case of only one car, you could save specific settings
for different courses as different model memories as
well.
Select the model to be
MODEL モデル
MODEL SEL セレクト
MODEL NAME ネーム
COPY コピー MDL01 TO
RESET リセット
【Setting Range】 MDL 01 〜 40
P
All of the various settings are registered under a model memory.
The settings which will be switched by Model Select are...
P
1)Steering Setting
2)Throttle Setting
3)3CH Setting
4)4CH Setting
5)Steering and Throttle Response
6)Steering and Throttle Feel
7)Setup Functions (ET1-ET5, BT1 function assignments)
8)Stopwatch Settings
Switching model memory while driving may cause setting
mismatches and lead to an uncontrollable model. Please
place the car on a stand or switch it off before switching
model memories.
Model selection changes and modulation mode
changes are not linked. Refer to p.24 changing the
modulation mode.
MDL01
ABCDEFGH
ABCDEFGH
MDL02
used.
MDL01
ABCDEFGH
ABCDEFGH
MDL02
▶ MODEL NAME
This function is used to name the model memory
that is currently in use. Distinguish each model
memory with different names, which may also be
edited. The set model name will be displayed on the
initial screen and model select screen.
MODEL モデル
MODEL SEL セレクト
MODEL NAME ネーム
COPY コピー
RESET リセット
Choose one character at a time from the left side.
【Setting Range】 40Setting Range Maximum
16 characters.
《Selectable Characters》
To delete a character, overwrite the character to be
P
deleted by using the blank space at the end of each
page of characters.
Characters inside the dotted lines are only available
P
when Japanese language has been selected.
25
MDL01
ABCDEFGH
ABCDEFGH
MDL01 TO MDL2