Curve; Punch; Dynamc - Ko Propo EX-RR Instruction Manual

DYNAMC Steering Dynamics
Settings related to steering control.
ST DYNAMICS ダイナミクス
N
L
▶ CURVE Steering Curve
Modify the movement speed ratio which corresponds to
steering angle.
▶ PUNCH Steering Punch
Modify how much the steering initially turns from neutral
position.
▶ CURVE Steering Curve
This function adjusts the ratio of the steering angle
to servo movement speed (Curve Characteristics).
Choose between (+) Quick Curve and (-) Mild Curve.
【Setting Range】
ST CURVE : -100 〜 0 〜 100%（Default: 0%）
【Example】
Modify the movement speed ratio which corresponds to
steering angle.
As the graph shows, servo movement speed can be
P
changed according to wheel movement angle.Positive
values (+1 to +100) equal high initial response followed
by mild response. Negative values (-1 to -100) equal a
mild initial response followed by high response.
When using this in conjunction with other functions such as
P
[Steering Speed], adjust one at a time to confirm their effects
to produce an effective overall setting.
To adjust only the steering's initial response, use the
P
[Steering Punch] function.

CURVE

%
ｶｰﾌﾞ 0

PUNCH

ﾊﾟﾝﾁ ０
%
R
▶ PUNCH Steering Punch
This function quickens the steering's initial response
and can be used to instill a strong turning movement
when the steering initially moves from neutral.
【Setting Range】
ST PUNCH : 0 〜 50%（Default: 0%）
The larger the value, the stronger the amount of turning
P
movement.
This could be effective if steering linkages have a lot of
P
slop, but please note that it does not improve straightline
performance.
When using this in conjunction with other functions such
P
as [Steering Speed], adjust one at a time to confirm their
effects to produce an effective overall setting.
44
Steering Movement
Steering Movement