Heat Pump - DeDietrich AWHP-2 MIT-IN-2 iSystem Installation And Service Manual

AWHP-2 MIT-IN-2 iSystem
AWHP
Calorific output - A7/W35
COP hot - A7/W35
Absorbed electrical power - A7/W35 kWe 0.87
Nominal amperage - A7/W35
AWHP
Calorific output - A2/W35
COP hot - A2/W35
Absorbed electrical power - A2/W35 kWe 1.13
Nominal amperage - A2/W35
AWHP
Cooling output
EER
Absorbed electrical power kWe 0.72
25/06/2014 - 7616371-001-04
3.4.2.
Conditions of use:
4 Limit operating temperatures in Hot mode:
4 Limit operating temperatures in Cooling mode:
4 Maximum operating pressure: 3 bar
n Performances in hot mode with outside air temperature
4 MR 6 MR -2 8 MR-2 11 MR-2 11 TR-2 16 MR-2 16 TR-2 22 TR 27 TR
kW 3.72 5.87
4.30 4.18
1.41
A 4.11 6.57
n Performances in hot mode with outside air temperature
4 MR 6 MR -2 8 MR-2 11 MR-2 11 TR-2 16 MR-2 16 TR-2 22 TR 27 TR
kW 3.76 3.87
3.32 3.26
1.19
A 6.1 6.1
n Performances in cold mode with outside air
4 MR 6 MR -2 8 MR-2 11 MR-2 11 TR-2 16 MR-2 16 TR-2 22 TR 27 TR
kW 3.84 4.69 7.90
3.80 3.80 3.99
1.15 2.0

Heat pump

- Water: +18 °C / +60 °C
- Outside air:
-15 °C / +35 °C (4, 6 kW)
-20 °C / +35 °C (8, 11, 16, 22, 27 kW)
- Water: +7 °C / +25 °C
- Outside air: +15 °C / +40 °C (At less than 18°C, it is necessary
to use the HK24 insulation kit option)
at +7°C and outlet water temperature at +35°C (in
accordance with EN 14511–2)
8.26 10.56 10.56
4.27 4.30 4.30
1.93 2.46 2.46
8.99 11.81 11.81
at +2°C and outlet water temperature at +35°C (in
accordance with EN 14511–2)
5.93 10.19 10.19
3.20 3.20 3.20
1.85 3.19 3.19
8.2 10.7 6.2
temperature at +35°C and outlet water temperature at
+18°C (in accordance with EN 14511–2)
11.16 11.16 14.46
4.68 4.68 4.43
2.35 2.35 3.65
3. Technical description
14.19 14.19 19.4
4.22 4.22 3.94
3.36 3.36 4.92
16.17 16.17 7.75
11.38 11.38 12.10 14.70
3.27 3.27 3.10
3.48 3.48 3.91
14.6 8.4 9.7
14.46 17.65 22.2
4.43 3.8 3.8
3.65 4.65 5.84
24.4
3.90
6.25
9.86
3.10
4.70
11.8
15