Connecting The Mains Supply To The Inside Module; Connecting The Electrical Back-Up To The Inside Module - DeDietrich AWHP-2 MIT-IN-2 iSystem Installation And Service Manual

AWHP-2 MIT-IN-2 iSystem
1
C3 C2 C1 L1 L2 L3
Configuration Alim appoint électrique Alim appoint électrique
PCU
C3 C2 C1 L1 L2 L3
Configuration Alim appoint électrique Alim appoint électrique
L1 L2 L3 N
1
25/06/2014 - 7616371-001-04
2 3
S2 S3
N C
M002409-B
M002489-C
N C S2 S3 C3 C2
BUS<>HP BUS<>HP Configuration
n Inside module with electrical back-up
Ouput configuration of electric back-ups
A
Auxiliary electrical power supply
Z
Bus for communication with the outside module
E
4.11.9. Connecting the mains supply to the inside
module
L (Live: Brown)
A
N (Neutral: Blue)
Z
* (Earth: Green/yellow wire)
E
Power connector
X1
CAUTION
The earth conductor must be longer than the live and
neutral conductors.
CAUTION
Use the cable clamps provided in the instructions bag.
4.11.10. Connecting the electrical back-up to the
inside module
C1 L1 L2 L3 N C S2 S3
Alim appoint électrique Alim appoint électrique BUS<>HP BUS<>HP
L N
2
Three-phase power supply: 400 V AC
A
4. Installation
M002408-D
49