DeDietrich AWHP-2 MIT-IN-2 iSystem Installation And Service Manual page 70

4. Installation
Settings to be made for this type of installation: master module
Parameters
INSTALLATION
(1)
CASCADE
(1)
MASTER CONTROLER
(1)
SYSTEM NETWORK
(1) The parameter is only displayed if INSTALLATION parameter is set to EXTENDED
Settings to be made for this type of installation: slave module
Parameters
INSTALLATION
(1)
CASCADE
MASTER
(1)
CONTROLER
(1)
SLAVE NUMBER
(1) The parameter is only displayed if INSTALLATION parameter is set to EXTENDED
68
Access Settings to be made
Installer level
EXTENDED
Menu #SYSTEM
Installer level
ON
Menu #NETWORK
Installer level
ON
Menu #NETWORK
Installer level Enlist generators or VMs in
Menu #NETWORK cascade mode.
Access Settings to be made See chapter
Installer level
EXTENDED
Menu #SYSTEM
Installer level
ON
Menu #NETWORK
Installer level
OFF
Menu #NETWORK
Installer level 2, 3, ...
Menu #NETWORK
CAUTION
The "cooling" function is impossible with a connection in
cascade.
See chapter
¼ "Displaying the parameters in
extended mode", page 84
¼ "Configuring the network", page
109
¼ "Displaying the parameters in extended
mode", page 84
¼ "Configuring the network", page 109
AWHP-2 MIT-IN-2 iSystem
25/06/2014 - 7616371-001-04