Accessing The Connection Terminal Blocks - DeDietrich AWHP-2 MIT-IN-2 iSystem Installation And Service Manual

4. Installation
2
44
4.11.3.
n Outdoor unit
Only for 4, 6 kW models
1. Unscrew the holding screws.
2. Remove the protection cap.
MW-2000052-1
Only for 8, 11, 16, 22, 27 kw models
1. Unscrew the holding screws.
2. Remove the protection cap.
MW-2000055-1
n Indoor module
To access the connection terminal blocks, proceed as follows:
1. Unscrew the 2 screws under the front panel by a quarter turn.
1
M002382-B

Accessing the connection terminal blocks

CAUTION
Secure the cables with cable clamps to obviate any
contact with the centre of the protective cover or the gas
valve.
AWHP-2 MIT-IN-2 iSystem
25/06/2014 - 7616371-001-04