Assembly Of The Indoor Module - DeDietrich AWHP-2 MIT-IN-2 iSystem Installation And Service Manual

4. Installation
8
4 5
8
5 5
0
Ø 1
6 1
1 1
28
2
1
3
3
M002380-B
M002381-C
4.5.3.

Assembly of the indoor module

n Fitting the mounting rail
1. Drill 2 holes with a Ø of 10 mm.
Additional holes are provided in case one or other of the
standard locating holes prevents the correct location of the
plugs.
2. Put the plugs in place.
3. Fix the mounting rail to the wall using the hexagonal head screws
provided for this purpose. Set the level using a spirit level.
n Fixing to the wall
CAUTION
Weight (empty): 74 kg
Shipping weight: 112 kg
1. Present the indoor module above the mounting rail until it rests
firmly against it.
2. Gently lower the indoor module.
AWHP-2 MIT-IN-2 iSystem
25/06/2014 - 7616371-001-04