DeDietrich AWHP-2 MIT-IN-2 iSystem Installation And Service Manual page 34

4. Installation
4
4MR - 6MR-2
22TR
6
32
3. Unscrew the screws.
3
M002397-C
4. Remove and discard the gates.
M002498-A
5. Only for 4 - 6 MR-2 models
Fit the 1/4" to 3/8" and 1/2" to 5/8" adapter fittings (Package
EH146).
Use the copper gaskets.
Use a torque wrench. ¼ See "torque" table (step 9).
Only for the 22 TR model
Fit a 3/8" to 1/2" adapter to the liquid connection.
Use the copper gaskets.
5 Use a torque wrench. ¼ See "torque" table (step 9).
M002398-D
5
M002399-D
6. Models 8 to 16 MR/TR-2 and 27 TR
7
Slip the nuts onto the pipes.
Models 4 and 6 MR-2and 22 TR
Slip the nuts provided with the adapters onto the pipes.
7. Bead the pipes.
M002207-B
CAUTION
Keep the frigorific connection in place on the MIT-IN-2 with
a spanner so as not to twist the internal pipe.
CAUTION
Keep the frigorific connection in place on the MIT-IN-2 with
a spanner so as not to twist the internal pipe.
AWHP-2 MIT-IN-2 iSystem
25/06/2014 - 7616371-001-04