DeDietrich AWHP-2 MIT-IN-2 iSystem Installation And Service Manual page 52

4. Installation
C3 C2
Configuration
50
n Fitting the jumpers and bridges
C1 L1 L2 L3 N C S2 S3
Alim appoint électrique Alim appoint électrique BUS<>HP BUS<>HP
*
1
n Output control
¼For setting the BACKUP TYPE parameter, see: "Professional
settings", page 98
Single phase power supply: 230 V AC
Z
CAUTION
The earth conductor must be longer than the live and
neutral conductors.
C3 C2 C1 L1 L2 L3 N
Configuration Alim appoint électrique Alim appoint électrique
*
2
Three-phase
A
Single phase
Z
For the various options for setting the bridge, see the
*
paragraph below, "Setting the output".
CAUTION
Check that the clips are correctly connected to the tab as
poor contact may lead to the connection overheating.
Type BACKUP TYPE
setting
Single phase /E2
/E1
AWHP-2 MIT-IN-2 iSystem
C S2 S3
BUS<>HP BUS<>HP
Back-up Output Bridge
Stage 1 2 kW
Stage 2 4 kW
Stage 1 + 2 6 kW
Stage 1 2 kW
25/06/2014 - 7616371-001-04
M002393-E
between C2 and
C1