3 Technical specifications
3
Technical specifications
3.1
Homologations
3.2
Technical data
Tab.4
Conditions of use
AWHP 4.5 MR
Limit water op
+18 °C/+55 °C
erating temper
atures in heat
ing mode
Outdoor air op
-15° C/+35 °C
erating temper
ature limits in
heating mode
Water operat
+7°C / +25°C
ing temperature
limits in cooling
mode
Outdoor air op
+7 °C/ +46 °C
erating temper
ature limits in
cooling mode
16
200 ESL HYBRID
3.1.1
Directives
This product complies with the requirements of the following European
Directives and Standards:
Pressure Equipment Directive 2014/68/EU
Low Voltage Directive 2014/35/EU
Generic standard: EN 60335-1
Relevant standards: EN 60335-2-40, EN 60335-2-21
Electromagnetic Compatibility Directive 2014/30/EU
Generic standards: EN 61000-6-3, EN 61000-6-1
Relevant Standard: EN 55014
Standard DIN 1988 (TWRWI): technical regulations for drinking water
installations
This product complies with the requirements of European Directive
2009/125/EC on the ecodesign of energy-related products.
This product complies with the MCS and HARP certifications.
In addition to the legal requirements and guidelines, the supplementary
guidelines in this manual must also be followed.
Supplements or subsequent regulations and guidelines that are valid at
the time of installation shall apply to all regulations and guidelines
specified in this manual.
3.2.1
Heat pump
Maximum operating pressure: 0.3 MPa (3 bar)
AWHP 6 MR-3
AWHP 8 MR-2
+18 °C/+60 °C
+18 °C/+60 °C
-15° C/+35 °C
-20° C/+35 °C
+7°C / +25°C
+7°C / +25°C
+7 °C/ +46 °C
+7 °C/ +46 °C
AWHP 11 MR-2
AWHP 16 MR-2
AWHP 11 TR-2
AWHP 16 TR-2
+18 °C/+60 °C
+18 °C/+60 °C
-20° C/+35 °C
-20° C/+35 °C
+7°C / +25°C
+7°C / +25°C
+7 °C/ +46 °C
+7 °C/ +46 °C
7763552 - v02 - 29062020