Power Source; Switching The Main Power On; Switching The Power On - Fuji Xerox ApeosPort-V C7776 User Manual

2 Product Overview

Power Source

The machine is provided with the push-button power switch and the main power switch.
 Push-button power switch
To use the machine, press the push-button
power switch to switch its power on. You can
start operations after the machine warms up.
 Main power switch
Press the main power switch to the [
position. The <Main Power> indicator goes out
on the right side of the control panel, and the
machine powers off. Do not switch the main
power off except when you connect a cable to the machine or clean the machine. Switching
off the main power may erase the data in the memory when using the Fax service.
2

Switching the Main Power On

The following describes how to switch the main power on.
Important • Do not switch off the main power immediately after switching on the main power. This may
1
Make sure that the power cord is plugged in correctly.
2
Open the front cover.
3
Press the main power switch to the [ | ] position
to switch the main power on.
The <Main Power> indicator lights up on the
control panel.
4
Close the front cover.

Switching the Power On

The following describes how to switch the power on.
The machine takes approximately 30 seconds to warm up and to be ready to copy or print
after switching the power on. This may take more time depending on the configuration of
your machine.
76
damage the hard disk and the memory or cause a machine malfunction.
]
Push-button power
switch
Main power switch