Folding (Outputting Bi-Folded/Tri-Folded Paper) - Fuji Xerox ApeosPort-V C7776 User Manual

Allows you to specify text from three preset texts, or text registered in the System Settings.
For information on how to register text, refer to "5 Tools" > "Common Service Settings" > "Secure Watermark" > "Secure
Watermark Effect" > "Custom Secure Watermark 1 to 3" in the Administrator Guide.
 Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
Note
 Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
 Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder.

Folding (Outputting Bi-Folded/Tri-Folded Paper)

This feature allows you to fold copies in half or in three.
When the C3 Finisher with Booklet Maker (optional) is installed, [Single Fold] is available.
When the Booklet Maker Unit for Finisher-B1 (optional) is installed, you can also crease the
output sheet in half.
When the Folder Unit CD1 (optional) is installed, [Z Fold] and [C Fold] are also available.
Note
1
Select [Folding].
2
Select any option.
 Off
Does not fold copies.
 Z Fold
Folds copies in three with the printed side inside
or outside.
printing surface comes inside
• If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
• The supported paper orientation is only
• [Z Fold] and [C Fold] can only be applied to A4 and 8.5 x 11" paper.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
printing surface comes outside
. Select the tray whose orientation is set to
Output Format
3
.
165