Fuji Xerox ApeosPort-V C7776 User Manual page 172

3 Copy
* : The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled in the
Paper Size and Punching Position (Finisher-B1, C3 Finisher, C3 Finisher with Booklet Maker)
This feature is available when the 2/4 Hole Punch Kit for C3 Finisher (optional) or the US 2/
3 Hole Punch Kit for C3 Finisher (optional) is installed.
Note
 2 holes
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
3
A4, A3, B4, 8 x 10", 8.5 x 11", 8.5 x 13",
11 x 15", 8.5 x 14", 11 x 17", 8K
 3 holes
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
A3, B4, 11 x 15", 11 x 17", 8K
4 holes

A4 , 7.25 x 10.5" , 8.5 x 11" , 16K
A3, 11 x 15", 11 x 17", 8K
172
orientation shown in the above table.
• The distance between the two holes of the 2/4 Hole Punch Kit for C3 Finisher is 80 mm for both 2
and 4 holes.
• The distance between the two holes of the US 2/3 Hole Punch Kit for C3 Finisher is 70 mm for 2
holes and 108 mm for 3 holes.
2 Holes 2 Holes Top
3 Holes 3 Holes Top
4 Holes 4 Holes Top
2 Holes
Right
3 Holes
Right
4 Holes
Right