Save In (Specifying A Storage Location In The Usb Memory Device) - Fuji Xerox ApeosPort-V C7776 User Manual

5 Scan
2
Select [Store to USB] on the Services Home
screen.
3
The [Store to USB] screen appears.
Important • Data stored in a USB memory device may be
Note
5

Save in (Specifying a Storage Location in the USB Memory Device)

You can specify a file storage location in the USB memory device.
1
Select [Save in].
2
Select a folder to save the data in.
Note
342
lost or damaged in the following cases. Make
sure to back up the data in the device before
use.
- When disconnecting/connecting the USB
memory device by methods other than
described in this guide.
- When receiving the effect of electrical
noise or an electrical discharge
- When a fault or failure occurs during operation
- If the USB memory device receives mechanical damage
• We assume no responsibility for any direct and indirect damages arising from or caused by such
data loss.
• If you do not specify the file storage location, the scanned data is saved in the root directory.
• Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• Scroll the list by drag or flick operation to
switch the screen to be displayed. For
information on how to drag or flick, refer to
"Touch Screen" (P.97).
• You can sort the order of folders displayed in
ascending or descending order by selecting
[Name] or [Last Updated].
• Up to 900 folder names can be displayed in the list of [Save in]. File names are not displayed.
• If a folder or file name has more than 170 characters long, the folder or file name is not displayed.
• Folders in the DCIM folder of digital cameras cannot be displayed. Thus, you cannot save files in
these folders either.
• Folder names which include characters that the machine does not support may not be correctly
displayed. If you specify the folders as file storage locations, an error occurs. For more information
on characters that the machine supports, refer to "Entering Text" (P.99).
* WSD stands for Web Services on Devices.