Fuji Xerox ApeosPort-V C7776 User Manual page 75

No. Component
9 Booklet staple cartridge
10 Tri-fold output tray
(When the optional Folder
Unit CD1 is installed)
11 Folder Unit cover
(When the optional Folder
Unit CD1 is installed)
12 Finisher transport center tray
(Top cover of the finisher
transport)
Note • The C3 Finisher and the C3 Finisher with Booklet Maker are optional. The common features of the
Finisher-A1, Finisher-B1, and C3 Finisher described in this guide are referred to as the "finisher".
Two staple cartridges for booklet creation. Take out the cartridges when
clearing stapled jams, or when replacing them with new ones.
Tri-folded outputs are delivered here.
Open this cover to clear paper jams.
Copies and prints are delivered here when they are unable to be delivered to
the output tray or finisher tray. Pull the cover upward when clearing paper
jams.
Note • Remove outputs delivered to the center tray constantly.
Machine Components
Function
2
75