Fuji Xerox ApeosPort-V C7776 User Manual page 254

4 Fax
 Sending to Folder (F Code Method)
When a folder is set on a remote machine, you can send a document directly to the folder
by specifying the F code (sub-address) and password (if set up) of the folder.
Obtain the F code (sub-address) and password of the remote folder in advance.
Example of specifying a destination:
F Code (sub-address)
Password (if set up)
 Secure Polling (F Code Method)
When a folder is set on a remote machine, you can perform secure polling for the folder by
specifying its F code (sub-address) and password (if set up).
If you use your machine to perform secure polling for a folder on a remote machine, obtain
the F Code (sub-address) and password of the target folder.
If you use a remote machine to perform secure polling for a folder on your machine, give the
following information.
F Code (sub-address)
4 Password (if necessary)
Note
A file received in the folder can automatically be printed depending on the folder settings. For information on the folder
settings, refer to "Configuring/Starting Job Flow" (P.381).
Depending on the report print settings, a Folder Report may not be printed even after a file is received in a folder. For
information on the Folder Report setting, refer to "5 Tools" > "Common Service Settings" > "Reports" > "Folder Report" in the
Administrator Guide.
For information on how to print files received in a folder, refer to "Printing Files in a Folder" (P.378).
Sending to Folder (F Code Method)
1
Select [F Code]
2
Select [On].
3
Select the [F Code] box, and enter an F code using the displayed keyboard or the numeric
keypad.
Note
254
: 0 (to designate an F Code transmission) and the folder number
of a folder on the remote machine
: The password of the remote folder
: 0 (to designate an F Code transmission) and the folder number
of the target folder
: The password of the target folder
• The DTMF method is available for Remote Folder. The supported signals are numerals, "*", and "#"
only.
• You can enter up to 20 digits for the F code.