Id Card Copy (Copying Both Sides Of An Id Card) - Fuji Xerox ApeosPort-V C7776 User Manual

ID Card Copy (Copying Both Sides of an ID Card)

This feature allows you to copy both sides of a small undetectable original, such as an ID
card, onto one side of paper.
Original document
Front side
Back side
1
Specify the orientation of the document in
[Original Orientation] on the [Layout
Adjustment] screen.
2
Place the document slightly away from the top left corner of the document glass, and close
the document glass.
Important • Always use the document glass when copying. You cannot use the document feeder with this
For information on how to specify the orientation of a document, refer to "Original Orientation (Specifying the Orientation
of Loaded Documents)" (P.145).
3
Select [ID Card Copy] on the [Output Format]
screen.
Front side
feature.
• Specify the orientation of the original document correctly.
• If the edges of the image are missing, slightly move the card inward on the document glass so that
the whole image can be scanned.
• When the reduced size is specified to copy an ID card, the machine may copy the ID card in a
different orientation from the original orientation depending on the magnification ratio specified.
For information on the copy magnification ratio for ID Card Copy, refer to "5 Tools" > "Common
Service Settings" > "Copy Service Settings" > "Copy Control" > "ID Card Copy - Reduce/Enlarge" in the
Administrator Guide.
Original orientation
Back side
Output Format
Copied output
3
173