Power Source; Switching The Main Power On; Switching The Power On - Fuji Xerox ApeosPort-V 4020 Quick Reference

2 Product Overview

Power Source

The machine is provided with the push-button power switch and the main power switch.
 Push-button power switch
To use the machine, press the push-
button power switch to switch its power
on. You can start operations after the
machine warms up.
 Main power switch
Press the main power switch to the [
position. The <Main Power> indicator
goes out on the right side of the control panel, and the machine powers off. Do not switch
the main power off except when you connect a cable to the machine or clean the machine.
Switching off the main power may erase the data in the memory when using the Fax service.
2

Switching the Main Power On

The following describes how to switch the main power on.
Important • Do not switch off the main power immediately after switching on the main power. This may
1
Connect the power code to the machine.
2
Press the main power switch to the [ | ] position
to switch the main power on.
The <Main Power> indicator lights up on the
control panel.

Switching the Power On

The following describes how to switch the power on.
The machine takes approximately 18 seconds to warm up and to be ready to copy or print
after switching the power on. This may take more time depending on the configuration of
your machine.
Switch the power off at the end of the day or when not using the machine for an extended
period of time.
You can also use the Power Saver feature to save power consumption while the machine is
not in use.
30
damage the hard disk and the memory or cause a machine malfunction.
]
Push-button
power switch
Main power
switch