Fuji Xerox ApeosPort-V C7776 User Manual page 103

Hide thumbs Also See for ApeosPort-V C7776:
Table of Contents

Advertisement

Document Type (Weight)
Heavyweight paper (81 - 128 gsm)
Important • To avoid paper jams, use the document glass for folded or wrinkled documents, cut-and-pasted
For information on how to copy mixed sized documents, refer to "Mixed Size Originals (Scanning Different Size Documents
Simultaneously)" (P.139).
1
Remove any paper clips and staples before loading a document.
2
Load the document face up (when the
document is 2-sided, load the front side up) in
the center of the document feeder.
Note
3
Adjust the document guides to match the size
of the document loaded.
4
Pull out the document stopper.
Document Glass
The document glass supports a single sheet, a book, or other similar documents with size 297
x 432 mm (Standard size: A3, 11 x 17").
Important • Always close the document cover after using the document glass.
The document glass automatically detects standard size documents. For non-standard size
documents, enter the size on the [Original Size] screen.
For information on document sizes that can be detected automatically and how to enter a non-standard document size,
refer to "Original Size (Specifying the Scan Size for the Document)" (P.138).
documents, curled paper, or back carbon paper.
• When Duplex Automatic Document Feeder B1-C is installed, the lightweight paper of 38 - 49 gsm
cannot be scanned 2 sided.
• The Confirmation indicator lights up when
the document is loaded correctly. If the
indicator does not light, load the document
again.
Number of Sheets
Duplex Automatic
Duplex Automatic
Document Feeder
Document Feeder
B1-C
75 sheets
Confirmation indicator
Copying Procedure
B1-PC
85 sheets
103
3

Advertisement

Table of Contents
loading

Table of Contents