Fuji Xerox ApeosPort-V C7776 User Manual page 251

 Sending to Folder (Fax Signal Method)
This feature allows you to send a file directly to a folder on the remote machine. The file can
be printed on the remote machine. To use this feature, you need the folder number and
passcode of the remote folder.
 Secure Polling (Fax Signal Method)
This feature allows you to retrieve a file from a folder on a remote machine by sending a
polling request from your machine. To use this feature, you need the folder number and
passcode of the remote folder.
The retrieved file is stored in a folder on the machine. When a file is received in a folder, the
<Data> indicator lights up and a Folder Report is printed. The Folder Report lists the folder
number and name.
Important • You cannot use polling to retrieve files from multiple remote folders simultaneously.
Note
For information on how to print files received in a folder, refer to "Printing Files in a Folder" (P.378).
Files received in folders can be automatically printed depending on the folder settings. For information on the folder
settings, refer to "Configuring/Starting Job Flow" (P.381).
Depending on the report print settings, a Folder Report may not be printed even after a file is received in a folder. For
information on the Folder Report setting, refer to "5 Tools" > "Common Service Settings" > "Reports" > "Folder Report" in the
Administrator Guide.
 Sending to Folder (DTMF Method)
To send a fax to a folder using the DTMF method, you need the folder number of the remote
folder. Two DTMF methods are available: Auto and Manual.
Sending to Folder (Fax Signal Method)
1
Select [Remote Folder].
2
Select [On].
 Off
Disables the Remote Folder feature.
 On
Enables the Remote Folder feature. Enter a
folder number in [Remote Folder Number].
 Remote Folder Number
Select the [Remote Folder Number] box, and enter a 3-digit folder number of the remote
machine using the numeric keypad.
• In the IP Fax (SIP) using VoIP Gateway, remote folder using Fax signal method is not available. Only
the F code method is available. for more information, refer to "Copy" (P.101)
• The DTMF method is available for Remote Folder. The supported signals are numerals, "*", and "#"
only.
Fax/Internet Fax Options
251
4