Control Panel - Fuji Xerox ApeosPort-V C7776 User Manual

2 Product Overview

Control Panel

The following describes the names and functions of components on the control panel.
2
25
No. Component
1 <Services Home> button
2 Touch screen
3 <Log In/Out> button
4 <Job Status> button
5 <Machine Status> button
6 <Power Saver> button
84
1
18
23 20 19
22 21
24
Press this button to display the Services Home screen.
You can change the services displayed on the Services Home screen. For more information,
refer to "1 Before Using the Machine" > "Customizing the Control Panel" > "Customizing the
Button Layout" > "Services Home" in the Administrator Guide.
Displays messages required for operation, and buttons for various features.
You can directly touch the touch screen to instruct operations and set
features.
Lights up when a user is authenticated in the System Administration mode,
the Authentication mode, or the Accounting mode. Displays the User ID
entry screen for entering the System Administration mode, the
Authentication mode, or the Accounting mode. Press this button to exit
these modes.
Press this button to check or cancel the current job, to check or print stored
jobs, or to check completed jobs.
Press this button to check the machine status and meters, to check the
status of consumables, and to print reports.
When the machine is not used for a while, it enters the Power Saver mode to
reduce power consumption. When the Power Saver mode is active, the
<Power Saver> button lights up.
Press this button to enter or exit the Power Saver mode.
2
3 4
16 15
17 14
Function
5 6
7
8
9
10
12 11
13