Calling A Stored Program - Fuji Xerox ApeosPort-V C7776 User Manual

Hide thumbs Also See for ApeosPort-V C7776:
Table of Contents

Advertisement

Calling a Stored Program

The following describes how to call a stored program.
When you call a specified stored program, the last screen shown when you registered the
stored program appears.
1
Press the <Services Home> button.
2
Select [Stored Programming].
3
Select a number of a stored program
containing the features you want to use.
Note
For information on how to change the volume of the sound that notifies that a stored program has been called, refer to "5
Tools" > "Common Service Settings" > "Audio Tones" > "Stored Programming Complete Tone" in the Administrator Guide.
4
After the stored program is called, select other features if necessary.
5
Press the <Start> button.
• You can only select registered numbers.
• Select [
] to return to the previous screen or
[
] to move to the next screen.
• Scroll the list by drag or flick operation to
switch the screen to be displayed. For
information on how to drag or flick, refer to
"Touch Screen" (P.97).
• After the stored program has been called, the machine sounds an audible tone. If a failure occurs,
the machine sounds a fault tone.
Calling a Stored Program
<Services Home> button
<Start> button
8
401

Advertisement

Table of Contents
loading

Table of Contents