Power Source; Switching The Main Power On - Fuji Xerox DocuCentre-VI C2264 Quick Reference For English-Speaking Users

Power Source

The machine is provided with the power switch and the main power switch.
Power switch
To use the machine, press the push-button power switch to switch its power on. You can start
operations after the machine warms up.
Main power switch
Press the main power switch to the [ ] position. The <Main Power> indicator goes out on
the right side of the control panel, and the machine powers off. Do not switch the main
power off except when you connect a cable to the machine or clean the machine. Switching
off the main power may erase the data in the memory when using the Fax service.

Switching the Main Power On

The following describes how to switch the main power on.
Note
1
Make sure that the power cord is plugged in correctly.
2
Open the front cover.
3
Press the main power switch to the [ | ] position to switch the main power on.
Power switch
Main power switch
• Do not switch off the main power immediately after switching on the main power. This may damage
the hard disk and the memory or cause a machine malfunction.

Power Source

2
45