Fuji Xerox ApeosPort-V C7776 User Manual page 24

1 Before Using the Machine
With C3 Finisher with Booklet Maker (optional), Folder Unit CD1 (optional), HCF B1 (optional), and Side Tray
1
10 °
Others
24
100
610
1123
1623
420
25
400
Do not incline the product at more than 10 degree angle. Otherwise, it may
fall over and cause injuries.
Front
Front
Back
Always lock the wheels of this product after installation. Otherwise, it may
fall over or slide and cause injuries.
To bundle wires and cables, always use the cable ties and spiral tubes that
Fuji Xerox supplies. Otherwise, it may cause some defects.
To keep this product in a good performance and condition, always use it in
the following environment:
Temperature: 10 - 32°C

Humidity: 15 - 85%

When the product is left in a chilly room and the room is rapidly warmed up
by heater, dew condensation may form inside the product and cause a
partial deletion on printing.
2232
2337
Left
Back
10 ° 10 °
80
(Unit: mm)
Right
Right
Left
10 °