Extinguishing Output; Fire Output; Fault Output; General Settings Menu - Teletek electronics SIMPO Operation And Maintenance Manual

3.4.2 Extinguishing Output

In this submenu the technician can disable/ enable the extinguish output activation. To access the EXTINGUISH
submenu, enter in menu - 5. PANEL OUTPUTS – EXITING. (2).
All set parameters are confirmed with ENTER button.

3.4.3 Fire Output

In this submenu the technician can disable/ enable the fire output activation and the time delay operation.
To access the FIRE submenu, enter in menu - 5. PANEL OUTPUTS - FIRE (3).
• ON - The delay of fire output will be active when DAY operation mode is set.
• OFF - No delay of fire output activation. The fire output is activated immediately.
• SCHEDULE - The delay of fire output will be active on schedule.
All set parameters are confirmed with ENTER button.

3.4.4 Fault Output

In this submenu the technician can disable/ enable the fault output activation.
To access the FAULT submenu, enter in menu - 5. PANEL OUTPUTS – MORE> (4) – FAULT (1).
All set parameters are confirmed with ENTER button.

3.5. General Settings Menu

This menu allows the technician to make some common settings for the fire panel.
A list with submenus is displayed after entering the maintenance menu - 6. GENERAL SETTING. The currently selected
submenu is blinking. To enter into a submenu press 'ENTER'.

3.5.1 Setting the Date and Time

In this submenu the technician can set the current time and date for the panel.
To access the TIME/ DATE submenu, enter in menu - 6. GENERAL SETTING - 6.2) TIME/ DATE. The screen displays:
SIMPO Addressable Fire Alarm Panel – Maintenance Menus
The functional button has the following action:
(2) - Press to change the status of the extinguish output. Every
pressing of the button changes alternatively the ENABLED -
DISABLED status. When the extinguish output is disabled the LED
''Disable' light on permanently.
The functional buttons have the following action:
(2) - Press to change the status of the fire output. Every pressing of
the button changes alternatively the ENABLED - DISABLED status.
When the fire output is disabled the LEDs 'Fire Output Fault/ Disable'
and 'Disable' light on permanently.
(4) - Press to set the time delay operation. Every pressing of the button
changes the 'Delay' setting:
The functional button has the following action:
(2) - Press to change the status of the fault output. Every pressing of
the button changes alternatively the ENABLED - DISABLED status.
When the fault output is disabled the LED 'Disable' light on
permanently.
Increasing
Decreasing
15
Switching between the
editable fields