Setting The Date - Teletek electronics ECLIPSE 8 User's Operation Manual

Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive
LED 32
After entering address 14, digit 15 on the display blinks, while 16 is lit permanently - the
system indicates that it expects entering an hour from 00 to 23. Enter the current hour.
After entering the first digit, on the display 15 is lit permanently, while 16 blinks. After the
second digit is entered, 15 blinks again, while 16 is lit permanently - the system indicates
that it expects entering minutes from 00 to 59. The indication is the same.
LED 8/LED 16A
After entering address 14, digit 1 on the display blinks, while 2, 3 and 4 are lit permanently
- the system indicates that it expects entering the new time in the format [HH:ММ] - hour
from 00 to 23 and minutes from 00 tо 59. Enter in sequence the new time. You can review
the entered time using the arrow buttons – the set value at the respective position is
indicated with a lit on in red digit button.
The entered time is confirmed by pressing the ENTER button.

5.18 Setting the Date

Setting the date is done in menu "4. SETTINGS – 2. DATE" or address 15, after entering
manager code:
Manager code
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive
LED 32
After entering address 15, on the display 15 blinks, while 16 is lit permanently – the
system indicates that it expects entering a day from 01 to 31. Enter the day. After entering
the first digit on the display 15 is lit permanently, while 16 is blinking. After entering the
second digit of the day 15 blinks again, while 16 is lit permanently – the system indicates
that it expects entering a month from 01 to 12. The indication is the same. Only the last
two digits of the year are entered.
LED 8/LED 16A
After entering address 15, on the display 1 blinks, while 2, 3, 4, 5 and 6 are permanently
lit – the system indicates that it expects entering of a new date in format [DD/ММ/YY].
Enter in sequence the new date. You can review the entered date using the arrow buttons
– the set value at the respective position is indicated with a lit on in red digit button.
ECLIPSE 8/16/32/99 Series – User Operation Manual
With the help of the digit buttons enter
hour and minutes in the format [HH:ММ] –
hour from 00 to 23 and minutes from 00 tо
59.
Address /
4. SETTINGS –
2. DATE
With the help of the digit buttons, enter
the date in the format [DD/ММ/YY] – day,
month, and year.
37
Date
[DD/ММ/YY]