Parts List Overview; Serial Number Format - Xerox ColorQube 8570 Service Manual

Parts List Overview

The Parts List section identifies all part numbers and the corresponding location of all spared
subsystem components.
Use of the Term "Assembly"
The term "assembly" is used for items in the parts listing that may include other itemized parts.
When the word "assembly" is found in the part number listing, there will be a corresponding
item number on the illustrations followed by a bracket and a listing of the contents of the
assembly.
Using the Parts Lists
Only those parts listed with part numbers are available for order. Parts listed without part
numbers are only available as part of a parent assembly or Service Kit.
• Item.: The callout number from the exploded part diagram.
• Part Number: The material part number used to order specific parts
• Description: Name of the part and number supplied per order.
• Parts throughout this manual are referenced PL#.#.#; For example, PL 3.0.10 means the
part is item 10 of Parts List 3.0.
• A black triangle preceding a number followed by a parenthetical statement indicates the
item is a parent assembly, made up of the parts listed in parentheses and enclosed by a
dashed line.
• The notation (P/O PL X.X Item X) following the part description indicates the part is
included with the item identified in the referenced Parts List.
• The notation "(with X~Y)" following a part name indicates an assembly includes
components X through Y. For example, "1 (with 2~4)" means part 1 consists of parts 2, 3,
and 4.
• The notation "J1<>J2 and P2" is attached to a wire harness. It indicates that connector
Jack 1 is attached to one end of the wire harness and connector J2 is attached to the
other end that is plugged into P2.
Xerox Internal Use Only - Revised, 3rd Revision
ColorQube 8570/8870 Service Manual

Serial Number Format

Changes to Xerox products are made to accommodate improved components. As
improvements are made, part numbers may change from those appearing in this section. To
get the latest part, provide the following information when ordering:
• Component's part number
• Product type or configuration number
• Serial number of the printer
The serial number is coded as follows:
• The text "S/N" followed by the serial number in the barcode.
• The barcode does not include a field identifier.
• The nine digit serial number format PPPRSSSSS where:
PPP - Is the alphanumeric Product Code
R - Is the numeric revision digit. Changes at major product updates or when the serial
number is reset to a starting value.
SSSSS - Is the five digit numeric serial number.
Table 1 8570/8870 Product Code
Product Product Code
8570 N/ DN/ DT XFN
8870 EE XFL
8570 DN F AN1
Serial Number Example: S/N XFN453072
• XFN = Product code for the 8570
• 4 = Revision Level
• 53072 = Serial Number
Figure 1 Serial Number Location
October 2012
Parts List Overview, Serial Number Format
5-3
Starting Serial Number Ending Serial Number
000501 500500
000501 500500
000001
Parts List