Xerox ColorQube 8570 Service Manual page 22

Electrical Specifications
Table 3 Electrical Specifications
Characteristic
Primary Line Voltages
Primary Line Voltages Frequency Range
Power Consumption at Rated Voltage Input
In-rush Current
Leakage Current
Environmental Specifications
Table 4 Environmental Specifications
Characteristic
Operating
Temperature
º º
10 to 32 C (50º to 90º F)
Humidity 10% to 80% RH Non-Condensing 10% to 95% RH, non-condensing
Altitude 0 to 2,438 meters (8,000 ft.)
Acoustic Noise Operation
Sound Power Level 7.0 B(A)
(Bels)
Sound Pressure (Deci- 57.0 dB(A)
bels)
NOTE: Check that the printer is on a stable, non-vibrating surface. Advise the customer to use
care not to shake the printer excessively when loading media or closing the Front Door. During
operation, the ink is in liquid form and can spill from the Printhead reservoir resulting in output
defects.
Introduction
Printer Specifications
Specifications
• 90 - 140 VAC
• 180 - 264 VAC
47 - 63 Hz
• Warm-Up:
– Peak: 1250 W
– Typical: 930 W
• Printing: 250 W
• Idle: 104 W
• Power Saver: 45 W
– 38 W (110)
– 41 W (220)
• Less than 12A (110)
• Less than 6A (220)
Less than 3.5 mA
Specifications
Storage
º º
-30 to 60 C (-22º to 140º F)
0 to 15,000 meters (49,212 ft.)
Standby or Ready
4.4 B(A)
31.0 dB(A)
Print Speed
Table 5 Print Speed Specifications
Resolution/ Tray
Tray 1
Fast Color (225x400)
Standard (300x450)
Enhanced (525x450)
Photo (525x2400)
PCL 600x400 Mode
PCL 600x600 Mode
Tray 2
Fast Color (225x400)
Standard (300x450)
Enhanced (525x450)
Photo (525x2400)
PCL 600x400 Mode
PCL 600x600 Mode
First Print Output Time
First Print Output Time (FPOT) is defined as the time from when the engine receives a Start
signal in Ready state, until a single page is printed and delivered to the output tray.
From Ready State
Resolution
Fast Color (225x400)
Standard (300x450)
Enhanced (525x450)
Photo (525x2400)
From Non-Ready State
First Print Out Time includes the time required to print any maintenance pages (such as the
mud page) and a single customer page on A size media from Tray 2.
Starting State
Off (cold)
Power Saver
Low Power (Standby)
Quiet Warm-Up
October 2012
xviii
Simplex, A4 Paper Auto Duplex, A4 Paper
13 ppm
11 ppm
10 ppm
6 ppm
10 ppm
6 ppm
40 ppm
30 ppm
19 ppm
6 ppm
20 ppm
12 ppm
Table 6 Ready State
FPOT
4 seconds or less
7 seconds or less
9 seconds or less
15 seconds or less
Table 7 Non-Ready State
FPOT
12 minutes
2.5 minutes
30 seconds
10 seconds
Revised, 3rd Revision - Xerox Internal Use Only
ColorQube 8570/8870 Service Manual
13 ppm
11 ppm
9 ppm
6 ppm
9 ppm
6 ppm
30 ppm
25 ppm
18 ppm
4 ppm
18 ppm
10 ppm