REP 5.4 NVRAM
Parts List on
PL 5.1 Item 4
Removal
NVRAM is vulnerable to ESD. Review the
the Introduction Chapter.
1.
Remove the 2 thumbscrews on the Rear Panel of the Electronics Module and remove the
Rear Panel.
Figure 1 Removing the Back Cover
Xerox Internal Use Only - Revised, 3rd Revision
ColorQube 8570/8870 Service Manual
CAUTION
Electrostatic Discharge Precautions
procedures in
NOTE: Observe the orientation of the NVRAM devices before removing it from the Board.
2.
Exchange the NVRAM.
October 2012
4-87
Figure 2 Removing the NVRAM
Repairs and Adjustments
REP 5.4