Physical Dimensions And Clearances - Xerox ColorQube 8570 Service Manual

Physical Dimensions and Clearances

Printer Dimensions
Table 1 Print Engine
Dimensions 8570N/ DN/ DT
Width 16.0 in. (40.6 cm)
Depth 20.5 in. (52.1 cm)
Height 14.6 in. (37.0 cm)
Weight 60.5 lbs. (27.4 kg)
Table 2 525-Sheet Feeder (Trays 3, 4, and 5)
Dimensions 8570N/ DN/ DT
Width 15.5 in. (40.0 cm)
Depth 20.0 in. (50.8 cm)
Height 5.0 in. (12.7 cm)
Weight 12.0 lbs. (5.4 kg)
Table 3 Printer Stand
Dimensions 8570N/ DN/ DT, 8870DN
Width 19.75 in. (50.2 cm)
Depth 27.0 in. (68.6 cm)
Height 14.0 in. (35.6 cm)
Weight 63.5 lbs. (28.8 kg)
Xerox Internal Use Only - Revised, 3rd Revision
ColorQube 8570/8870 Service Manual
Clearance and Mounting Surface Specifications
These specifications apply to any printer used as a table-top printer, without a Lower Tray
Assembly or Printer Stand.
1. In order to function properly, the printer must be placed on a flat surface with the following
8870DN
minimum clearances.
16.0 in. (40.6 cm)
20.5 in. (52.1 cm)
14.6 in. (37.0 cm)
60.5 lbs. (27.4 kg)
8870DN
15.5 in. (40.0 cm)
20.5 in. (52.1 cm)
5.0 in. (12.7 cm)
12.0 lbs. (5.4 kg)
October 2012
xxi
Figure 1 Clearance Specifications
Physical Dimensions and
Introduction