Honda Prelude 1993 Service Manual page 136

27. Remove the 6 x 1,O mm bolt from the timing belt ad-
juster arm.
28. Remove the crankshaft pulley.
29, Install the lower cover.
30. Install a rubber seal around the adiusting nut. Do not
loosen the nut.
31. Install the middle cover.
32. Install the crankshaft putley.
33. Coat the throads 8nd seating face of the pulley bolt
with engine oil. Install and tighten to the specified
toroue.
Spocified to|ql|3: 220 N.m {22.0 kg-m, 159 tb-ft)
RUBBER SEAL
Replace when
damaged or
deteriorat€d.
6 x 'l.O mm
1 2 N m ( 1 . 2 k s - m , I l b , f t )
PULLEY EOLT
1 4 r 1 . 2 5 m m
22O N.m 122.0 ks-tn
159 lb-ft)
MIODLE COVER
RUBEER SEAL
Replac€ when
damaged ot
deteriorated.
RUEBER SEALS
Repl6c6 when
damag€d or
dsteriorated.
6 x 1.O rrn
12 N.m ll.2 kg-m, I lb-ftl
CRANKSHAFT
PUI.LEY
Bemove any oil.
10 x 1.25 rm
45 N.m (4.5 kg-rn, 33 lb-ftl
6-67