Honda Prelude 1993 Service Manual page 115

Cylinder Head
Removal {cont'd)
Remove the PCV hose, then remove the cylinder
head cover.
Remove the middle cover.
Loosen the adjusting nut 180".
Push the tensioner to release tension from the tim-
ing belt, then retighten the adjusting nut.
23,
Remove the timing belt trom the camshaJt pulleys.
CAUTION: Do not crimp or bond
tho timing belt more than 90 o ol lsss
than 25 mm ( l inl in diametor.
G4z
No Good
1 9 .
20.
2 1 .
24.
Remove the camshatt Pullsys.
NOTE: To set the camshafts at TDC for No. 1
cylinder, align the holes in the camshafts with thg
holes in the No. 1 camshaft holders and insert 5.O
mm oin punches.
8 r 1.25 mm
38 .m 13.8 kg{r,
27 tb-ft)
25. Loosen the rocker arm adiusting screws, then re-
move the camshaft holders and camshafts.
ADJUSTING SCREWS
ADJUSTING SCREWS
6-46