Video Network - Polycom ViewStation FX User Manual

Chapter 5

Video Network

ViewStation FX/VS 4000 User's Guide
• Allow User Setup—Used to enable or disable the User Setup
icon on the System Info screen. Administrators can use this
option to prevent users from changing the user setup functions.
• Maximum time in call—Enter the maximum number of minutes
allowed for call length. When that time has expired in a call, you
see a message asking you if you want to hang up or stay in the
call. If you do not answer within one minute, the call
automatically disconnects.
• Maximum Call Length—The default maximum time in a call is
480 minutes. You can change this setting. Setting this field to 0
allows the system to remain in a call indefinitely.
Highlight the Video Network icon to access the Network Setup
screen. From the Network Setup screen you can access the
following screens:
For a V.35 network interface:
• Video Network
• Call Preference
• Numbers
• Advanced V.35 Setup
• Multipoint (w/H.323)
For PRI interfaces:
• IMUX
• Call preference
• Multipoint Setup
• Dialing Speeds
For BRI network interface:
• IMUX
• Call Preference
• Multipoint
• ISDN Video Network
The following section briefly describes each of these screens:
System Information and Diagnostics
140 www.polycom.com