Adding A Telephone Call To A Video Call - Polycom ViewStation FX User Manual

Chapter 2
© Polycom, Inc.
Complete the following steps to place a telephone call from your
ViewStation FX or VS4000.
1. From the Main calling screen, select Call Type>Telephone Call
and press the
Figure 2-4. Telephone Call Screen
2. Use the numeric keypad on the remote control to enter the
number you want to dial. If you are dialing within your PBX
system, you only have to dial the last four digits of the number.
If you want to delete a digit, press the left arrow button on the
remote control. To delete an entire phone number, highlight the
Clear icon on the screen and press the
3. Press the CALL•HANG-UP button on the remote control to place
the call.
4. To end the call, press the CALL•HANG-UP button on the remote
control.

Adding a Telephone Call to a Video Call

Once your video call is connected, you can add a telephone call as
follows:
1. Press the CALL•HANG-UP button on the remote control. The
Call Hang-up Choices screen appears.
2. Select the Add Speakerphone icon and press the
The Telephone screen appears.
3. Enter the phone number of the third party using the numeric
keypad on the remote control and press the
ViewStation FX or the VS4000 begins dialing the third party.
Using the ViewStation FX and the VS4000
button. The Telephone Call screen appears.
51 ViewStation FX/VS 4000 User's Guide
button.
button.
button. The